Schwind Amaris

The SCHWIND AMARIS excimer laser systems are advanced ophthalmic technologies designed primarily for corneal refractive surgery to correct refractive errors, including myopia (short-sightedness), hyperopia (long-sightedness), and astigmatism. Developed by SCHWIND eye-tech-solutions, these systems use ultraviolet excimer laser energy to precisely remove microscopic amounts of corneal tissue through a process known as photoablation. By reshaping the cornea, the laser modifies its refractive power, enabling light to focus more accurately on the retina and improving visual acuity.

SCHWIND AMARIS systems incorporate technologies such as high-speed laser delivery, sophisticated eye-tracking mechanisms, and customised treatment planning to support accurate and controlled corneal reshaping. Depending on the model and treatment platform, the systems can be used for procedures such as photorefractive keratectomy (PRK), laser-assisted in situ keratomileusis (LASIK), and transepithelial photorefractive keratectomy (TransPRK). These capabilities have contributed to the use of AMARIS technology in modern refractive surgery, where treatment precision, patient safety, and the optimisation of visual outcomes are central considerations.

Key features of the AMARIS platform include high-frequency laser pulses, fine-spot ablation, active eye tracking, and treatment-planning software that supports customised corneal ablation profiles. The precise specifications and tracking capabilities vary between models, such as the AMARIS 500E, 750S, and 1050RS.

These technologies are designed to improve the control and consistency of laser delivery while allowing clinicians to tailor treatment to individual corneal characteristics and refractive requirements. However, treatment suitability and outcomes depend on patient selection, preoperative assessment, corneal characteristics, and surgical technique.

The SCHWIND AMARIS 1050RS is a high-performance ophthalmic excimer laser system developed by SCHWIND eye-tech-solutions for refractive and selected therapeutic corneal procedures. It uses ultraviolet laser energy to perform precise corneal tissue ablation, reshaping the cornea to correct refractive errors and improve visual function. Its key technologies include a 1,050 Hz laser repetition rate, a fine 0.54 mm laser spot, and advanced seven-dimensional (7D) eye tracking designed to compensate for eye movements during treatment. The system also incorporates Automatic Fluence Level Adjustment (AFLA) and Intelligent Thermal Effect Control (ITEC), supporting controlled energy delivery and management of the thermal effects of ablation. With compatible treatment-planning software and procedure-specific modules, the AMARIS 1050RS supports a range of customised refractive and therapeutic corneal treatments.

Specifications

Parameter Specification
Manufacturer SCHWIND eye-tech-solutions, Germany
Device type Excimer laser system for corneal refractive and therapeutic surgery
Laser wavelength 193 nm (ultraviolet excimer laser)
Maximum repetition rate 1,050 Hz
Laser spot diameter 0.54 mm (full width at half maximum, FWHM)
Beam profile Super-Gaussian
Beam delivery Flying-spot laser system
Ablation time Approximately 1.3 seconds per dioptre under specified myopic LASIK conditions, without astigmatism, using a 6 mm optical zone
Eye-tracking system 7D eye tracking, including spatial movement and cyclotorsional compensation
Eye-tracker sampling rate 1,050 Hz
Latency-free tracking Available as the seventh tracking dimension, subject to system configuration
Fluence management Automatic Fluence Level Adjustment (AFLA)
Thermal management Intelligent Thermal Effect Control (ITEC)
Treatment planning SCHWIND CAM software and compatible procedure-specific modules
Corneal thickness measurement Online pachymetry available, depending on configuration
Laser arm 90° swivelling arm
Dimensions (L × W × H) Approximately 2,634 × 1,443 (±50) × 1,418 mm, including patient bed

 

 

Applications

The SCHWIND AMARIS 1050RS can be used for the following applications, depending on the installed software modules, clinical indications and surgeon assessment:

•   Myopia correction: Treatment of short-sightedness through controlled corneal flattening.

•   Hyperopia correction: Treatment of long-sightedness through customised corneal reshaping.

•   Astigmatism correction: Correction of irregular or asymmetric corneal refractive power using planned ablation profiles.

•   LASIK: Excimer laser ablation of the corneal stroma following flap creation, typically using a separate femtosecond laser or another appropriate flap-creation method.

•   PRK: Surface ablation to correct refractive errors without creating a LASIK flap.

•   TransPRK / SmartSurfACE: Transepithelial, no-touch surface ablation using compatible SCHWIND treatment technology.

•   Wavefront-guided and corneal topography-guided treatments: Individualised ablation based on appropriate diagnostic measurements and compatible treatment-planning software.

•   Presbyopia treatment: PresbyMAX procedures for selected patients, when the relevant treatment module is installed.

•   Phototherapeutic keratectomy (PTK): Removal of selected superficial corneal opacities or irregularities, subject to clinical indication and availability of the appropriate module.

•   Selected therapeutic corneal procedures: Additional treatments for specific corneal conditions using compatible therapeutic planning modules.

The SCHWIND AMARIS 750S is a high-performance ophthalmic excimer laser system developed by SCHWIND eye-tech-solutions for refractive and selected therapeutic corneal surgery. It uses ultraviolet laser energy to remove microscopic amounts of corneal tissue, reshaping the cornea to correct refractive errors and improve visual function. The system operates at a laser repetition rate of 750 Hz and features a 0.54 mm flying-spot laser beam with a Super-Gaussian profile, designed to support precise and smooth corneal ablation. Its 6D eye-tracking system samples eye position at 1,050 Hz and compensates for movements in multiple dimensions, with a typical system reaction time of approximately 3 milliseconds. Additional technologies include Automatic Fluence Level Adjustment (AFLA) and Intelligent Thermal Effect Control (ITEC), which support controlled laser delivery and management of thermal effects. Combined with SCHWIND CAM treatment-planning software, the AMARIS 750S supports customised refractive and selected therapeutic procedures, subject to the installed modules and system configuration.

Specifications

Parameter Specification
Manufacturer SCHWIND eye-tech-solutions, Germany
Device type Excimer laser system for corneal refractive and therapeutic surgery
Laser wavelength 193 nm (ultraviolet excimer laser)
Laser repetition rate 750 Hz
Laser spot diameter 0.54 mm (FWHM — full width at half maximum)
Beam profile Super-Gaussian
Beam delivery system Flying-spot laser with Automatic Fluence Level Adjustment (AFLA)
Ablation concept Dual-fluence ablation, using higher and lower fluence levels during treatment
Ablation time Approximately 1.5 seconds per dioptre for specified myopic treatment conditions without astigmatism, using a 6 mm optical zone
Eye-tracking system Active 6D eye tracking, including compensation for lateral movements and cyclotorsional rotation; Z-tracking availability depends on configuration
Eye-tracker sampling rate 1,050 Hz
System reaction time Approximately 3 milliseconds
Pupil and limbus tracking Includes pupil centroid shift compensation and automatic pupil size control
Fluence management Automatic Fluence Level Adjustment (AFLA)
Thermal management Intelligent Thermal Effect Control (ITEC)
Treatment-planning software SCHWIND CAM, with procedure-specific modules according to configuration
Online pachymetry Available as an optional feature, depending on configuration
Laser arm 90° swivelling laser arm
Patient bed Swivelling patient bed; motorised movement may be optional, depending on configuration
Working distance Approximately 235 mm
Dimensions (L × W × H) Approximately 2,634 × 1,443 (±50) × 1,418 mm, including patient bed

 

Applications

The SCHWIND AMARIS 750S supports a range of refractive and therapeutic corneal procedures, depending on the installed treatment modules, clinical indications and surgeon assessment.

•   Myopia correction: Reshaping the cornea to reduce short-sightedness.

•   Hyperopia correction: Modifying corneal curvature to correct long-sightedness.

•   Astigmatism correction: Treating corneal refractive asymmetry using planned laser ablation profiles.

•   LASIK: Performing stromal ablation after a corneal flap has been created, typically using a separate femtosecond laser or another appropriate flap-creation technique.

•   Photorefractive keratectomy (PRK): Surface ablation to correct refractive errors without creating a LASIK flap.

•   TransPRK / SmartSurfACE: No-touch transepithelial surface ablation using compatible SCHWIND treatment technology.

•   Wavefront-guided and topography-guided treatments: Customised ablation based on diagnostic wavefront or corneal topography measurements, where supported by the relevant software and treatment protocol.

•   Presbyopia correction: PresbyMAX treatments for selected patients, when the appropriate module is available.

•   Phototherapeutic keratectomy (PTK): Treatment of selected superficial corneal irregularities, opacities or other suitable corneal conditions using compatible therapeutic software.

•   Selected therapeutic corneal treatments: Procedures such as refractive-neutral PTK and other specialised treatments, where supported by the installed modules.

•   Corneal collagen cross-linking support: The wider SCHWIND platform can be integrated with compatible CXL equipment, such as the CXL-365 vario system. Cross-linking is a separate treatment modality, not an excimer laser ablation procedure performed by the AMARIS 750S itself.

The SCHWIND AMARIS 500E is a compact ophthalmic excimer laser system developed by SCHWIND eye-tech-solutions for refractive and selected therapeutic corneal surgery. It uses 193 nm ultraviolet laser energy to remove microscopic amounts of corneal tissue, reshaping the cornea to correct refractive errors. The system operates at a pulse repetition rate of 500 Hz and incorporates a 0.54 mm flying-spot laser with a Super-Gaussian beam profile. Its active 5D eye-tracking system samples eye position at 1,050 Hz and compensates for eye movements, including cyclotorsional rotation. Additional technologies include Automatic Fluence Level Adjustment (AFLA), Intelligent Thermal Effect Control (ITEC), and SmartPulse technology, which are designed to support controlled ablation and smooth corneal surface modelling. With SCHWIND CAM treatment-planning software and compatible procedure-specific modules, the AMARIS 500E supports customised refractive treatments and selected therapeutic corneal procedures.

Specifications

Parameter Specification
Manufacturer SCHWIND eye-tech-solutions, Germany
Device type Excimer laser system for corneal refractive and selected therapeutic surgery
Laser wavelength 193 nm (ultraviolet excimer laser)
Laser repetition rate 500 Hz
Laser spot diameter 0.54 mm (FWHM — full width at half maximum)
Beam profile Super-Gaussian
Beam delivery system Flying-spot laser with Automatic Fluence Level Adjustment (AFLA)
Ablation time Approximately 2.0 seconds per dioptre for myopic treatment without astigmatism, using a 6 mm optical zone and 12.5 mm vertex distance
Eye-tracking system Active 5D eye tracking, including lateral movements, rolling movements and static/dynamic cyclotorsion compensation
Eye-tracker sampling rate 1,050 Hz
Eye-tracker latency Approximately 1.6 milliseconds for eye-position measurement; overall system reaction time is specified as approximately 3 milliseconds
Fluence management Automatic Fluence Level Adjustment (AFLA), with higher and lower fluence levels used during different ablation stages
Thermal management Intelligent Thermal Effect Control (ITEC)
Surface smoothing SmartPulse technology
Treatment-planning software SCHWIND CAM, with compatible procedure-specific modules
Online pachymetry Available as an optional feature, depending on configuration
Particle aspiration Integrated particle aspiration system designed to maintain a stable treatment environment
Laser arm Fixed/non-swivelling configuration in the published AMARIS family specification
Patient bed Swivelling patient bed; motorised movement may be optional
Working distance Approximately 235 mm
Dimensions (L × W × H) Approximately 2,265 × 1,486 (±50) × 1,411 mm, including patient bed

Applications

The SCHWIND AMARIS 500E supports several refractive and therapeutic corneal procedures, subject to the installed treatment modules, clinical indications and surgeon assessment.

•   Myopia correction: Reshaping the cornea to reduce short-sightedness.

•   Hyperopia correction: Modifying corneal curvature to correct long-sightedness.

•   Astigmatism correction: Treating corneal refractive asymmetry using customised ablation profiles.

•   LASIK: Performing corneal stromal ablation after a flap has been created, usually with a separate femtosecond laser or another appropriate flap-creation method.

•   Photorefractive keratectomy (PRK): Surface ablation to correct refractive errors without creating a LASIK flap.

•   TransPRK / SmartSurfACE: No-touch transepithelial surface ablation using compatible SCHWIND treatment technology.

•   Wavefront-guided treatments: Customised corneal ablation based on suitable wavefront measurements, where supported by the installed software and treatment protocol.

•   Topography-guided treatments: Individualised treatment based on corneal topography measurements, when supported by the relevant diagnostic and planning modules.

•   Presbyopia correction: PresbyMAX procedures for selected patients, when the appropriate software module is installed.

•   Phototherapeutic keratectomy (PTK): Treatment of selected superficial corneal opacities, irregularities or other suitable corneal conditions using compatible therapeutic software.

•   Selected therapeutic corneal treatments: Procedures such as refractive-neutral PTK and other specialised treatments where supported by the installed modules.

•   Corneal collagen cross-linking support: The wider SCHWIND platform can be used alongside compatible cross-linking equipment, such as the CXL-365 vario. Cross-linking is a separate procedure and is not performed by the AMARIS 500E excimer laser itself.

Can’t find something? Email us at sales@gossinst.co.uk or message our team via the contact page. We are always happy to answer any questions you may have regarding our products and will be delighted to assist you in locating precisely what you need.