Safety Data Sheet
- Catalogue Number: MSK-TCA1
- Product Description: TCA Cycle Standards Mix 1
- Storage Conditions: Store at room temperature. Protect from light and moisture.
- Recommended Retest: 2 years from date of manufacture
- Intended Use: For Research Use Only. Not for use in diagnostic procedures.
| Compound Description* (Isotopic Label, Enrichment) |
Concentration (μM)† |
| Fumaric acid, disodium salt (13C4, 99%) |
100 |
| DL-2-Hydroxyglutaric acid, disodium salt (13C5, 99%) |
100 |
| α-Ketoglutaric acid, disodium salt (1,2,3,4-13C4, 99%) |
100 |
| Malic acid, disodium salt monohydrate (13C4, 99%) |
100 |
| Sodium L-lactate (13C3, 98%) 20% w/w in H2O |
100 |
| Sodium Pyruvate (13C3, 99%) |
100 |
| Succinic acid, disodium salt (13C4, 99%) |
100 |
| Trisodium citrate, hemihydrate (1,5,6-carboxy-13C3, 99%) |
100 |
* Chemical purity (CP) is 98% or greater, unless otherwise specified. CPs are based upon HPLC and/or quantitative NMR analysis of the neat material. Each CP is accounted for in calculating the compound concentration for formulation.
† Concentrations are achieved by reconstituting the dried down mix in 1 mL of solvent.
- Catalogue Number: MSK-TCA2
- Product Description: TCA Cycle Standards Mix 2A
- Storage Conditions: Store at room temperature. Protect from light and moisture.
- Recommended Retest: 2 years from date of manufacture
- Intended Use: For Research Use Only. Not for use in diagnostic procedures.
| Compound Description* (Isotopic Label, Enrichment) |
Concentration (μM)† |
| L-Aspartic acid (13C4, 99%) |
100 |
| L-Glutamic acid (13C5, 99%) |
100 |
| Itaconic acid (13C5, 99%) CP 97% |
100 |
| Potassium phosphoenol pyruvate (2,3-13C2, 99%) CP 97% |
100 |
| Isocitric acid, trisodium salt hydrate (3,4,5,6-13C4, 98%) mixture of diastereomers |
100 |
| cis-Aconitic acid, trisodium salt trihydrate (¹³C₄, 99%) (1,2,3,6 : 3,4,5,6 AS 96:4) CP 97% |
100 |
* Chemical purity (CP) is 98% or greater, unless otherwise specified. CPs are based upon HPLC and/or quantitative NMR analysis of the neat material. Each CP is accounted for in calculating the compound concentration for formulation.
† Concentrations are achieved by reconstituting the dried down mix in 1 mL of solvent.